![Optimizing 3D Printing Layer Height: Improve Quality and Efficiency | ANYCUBIC 3D Printing – ANYCUBIC-US Optimizing 3D Printing Layer Height: Improve Quality and Efficiency | ANYCUBIC 3D Printing – ANYCUBIC-US](https://cdn.shopify.com/s/files/1/0245/5519/2380/files/small-height-layer-for-3d-printing.png?v=1678946208)
Optimizing 3D Printing Layer Height: Improve Quality and Efficiency | ANYCUBIC 3D Printing – ANYCUBIC-US
![Comparison between 0.2mm layer height and 0.04mm. Petg at 230°C for max durability and 80°C on the bed, on a stock ender 3(with a cheap bimetal throat) : r/3Dprinting Comparison between 0.2mm layer height and 0.04mm. Petg at 230°C for max durability and 80°C on the bed, on a stock ender 3(with a cheap bimetal throat) : r/3Dprinting](https://external-preview.redd.it/comparison-between-0-2mm-layer-height-and-0-04mm-petg-at-v0-iPvHBFLOcSA6oEyDW_LKIyDN9BOl4gYkX0KrE6GNqD4.jpg?auto=webp&s=3b06ceba067bd1bc42495f7fe6048bbbc587486a)
Comparison between 0.2mm layer height and 0.04mm. Petg at 230°C for max durability and 80°C on the bed, on a stock ender 3(with a cheap bimetal throat) : r/3Dprinting
![Optimizing 3D Printing Layer Height: Improve Quality and Efficiency | ANYCUBIC 3D Printing – ANYCUBIC-US Optimizing 3D Printing Layer Height: Improve Quality and Efficiency | ANYCUBIC 3D Printing – ANYCUBIC-US](http://store.anycubic.com/cdn/shop/articles/impact-of-layer-height-on-3d-prints.jpg?v=1678937660)
Optimizing 3D Printing Layer Height: Improve Quality and Efficiency | ANYCUBIC 3D Printing – ANYCUBIC-US
![0.48mm layer height on 0.4mm nozzle. turns out maximum layer height is largely dependent on line with, not nozzle diameter. : r/3Dprinting 0.48mm layer height on 0.4mm nozzle. turns out maximum layer height is largely dependent on line with, not nozzle diameter. : r/3Dprinting](https://i.redd.it/3a8ii8553kk91.jpg)